| Phone |
Binghamton
Area: 607-444-2164
Watertown Area: 315-788-0930 |
| Email |
|
neil@swbg.us |
|
|
Pump Sales |
SWBG sells all major brands, featuring:
|
• Jacuzzi
Pumps - Jacuzzi Brothers is the mst trusted name
in water with over 75 years of serving the world
with their water needs. Premier Pump offers
their complete line of water system products. |
 |
|
• Gould
Pumps - Home water supply from wells or
municipal water, pressure boosting submersible
and surface pumps and controls. |
 |
Different types of pumps SWBG sells
 • Home,
house and residential water pumps
• Residential
wastewater pumps
• Industrial,
commercial and municipal wastewater pumps
• Industrial
water and wastewater
• Agriculture
and farm pumps
• Turf
irrigation pumps
• Building
trades
Water Well Pumps and Systems
When you turn the tap you set a series of actions in
motion. To ensure adequate water pressure, well water
is stored inside your building in a pressure tank.
Normal water pressure is between 40 and 60 psi (pounds
per square inch).
As water continues to run, the volume of water in the
pressure tank drops, which also lowers the water
pressure.
When the pressure drops below 40 psi, a pressure switch
activates the pumping system. The submersible pump
pumps water into the pressure tank until normal pressure
is reached and the pump automatically shuts off. A
safety valve installed on the pressure tank is designed
to release pressure should it exceen 75 psi.
 Pump
Selection and Installation
Before SWBG recommends a pump, we will factor in:
• How
much water will be needed at peak demand
• The
well's yield potential in gallons per minute
• Diameter
of the well at the pumping level
• Depth
of ground water below the surface
• Distance
and elevation of the home above the well
• Future
needs, such as irrigation
Because SWBG provides well-to-faucet water systems by
licensed, certified and experienced technicians, we can
guarantee the performance of the system and its
components.
How A Pump Works
SWBG installs complete systems. We use only high
quality components - not the parts you can buy at your
local "big box" discount retailer. The difference is
that a pumping system installed by SWBG is dependable,
fully guaranteed and installed by our installation and
repair staff.
A submersible water pump is comprised of a series
(usually ten) of small impellers, stacked horizontally
on top of each other. When activated, the impellers
rotate at approximately 3,450 RPM moving the well water
up the drop line and into the pressure tank. Because
the pump operates electrically, wires must run down into
the well and be connected to the pump. All wiring
connections are permanently sealed to avoid voltage
leaks and short circuits. A torque arrester and cable
guards are installed above the pump to prevent wires
from twisting and chafing during pump operation. The
torque arrester extends the life of the pump by
preventing voltage leaks and short circuits that would
be caused if the wire coatings were compromised.
Give us a call and let our professional staff determine
which system is right for you. |
|
